Valide la compatibilidad de nuestro producto con su equipo.

Su " " es generalmente compatible con el S-TECH 1000G.
Contáctenos para confirmar la compatibilidad con las opciones y componentes de su equipo que puedan afectarla.

Su " " no es compatible con el S-TECH 1000G.
Comparta su información con nosotros si desea ser contactado cuando nuestro producto sea compatible con su equipo.

Su formulario se ha enviado correctamente

Se ha producido un error, inténtelo de nuevo más tarde

Producto

TRACK SYSTEM FOR COMBINE HARVESTERS S-TECH 1000G

Su información

Se ha producido un error, inténtelo de nuevo más tarde

Su formulario se ha enviado correctamente

SYS S TECH 1000 G rendu test 2024 03 28 142353 serr
TRACK SYSTEM FOR COMBINE HARVESTERS

S-TECH 1000G

Access your fields at all times.

  • Excellent flotation for compact combine harvesters
  • Fast and easy to switch from tires to tracks in 2 to 3 hours
  • Work in muddy conditions without getting stuck
Cómo comprar
o
Visión general

OPTIMAL FLOTATION
You can bank on optimal flotation. Even in difficult soil conditions, the track’s 36 in (914 mm) width and 5,710 in² (3.68 m²) ground contact surface enable you to harvest confidently.

BETTER MANEUVERABILITY
The S-TECH 1000G has a more compact design. This means more maneuverability for you. Turning at the end of the field has never been easier!

QUICK AND EASY INSTALLATION
We know that when it’s harvest time, every second counts! The S-TECH 1000G is easy to install. Thanks to its bolt-on design, you can switch from tires to tracks in under 3 hours, ensuring a flexible harvesting plan.

Soucy Track for Combines - A track system you can count on (youtube.com)

158 A1796 retouche 5
Especificaciones técnicas
A Track width 914 mm
B Overall length 2,899 mm
C Overall height 1,728 mm
D Pivot axis height 1,016 mm
E Rear tension wheel diameter 711 mm
F Support wheel diameter 368 mm
Weight Approximately 9,900 lbs / 4,490 kg
Transport load capacity Up to 52,250 lbs / 23,700 kg
Maximum transport speed 28 km/h / 17.5 mph (may vary depending on tire size and transmission configuration)
Load capacity in the field Up to 65,000 lbs / 29,500 kg
Total ground contact area 3.68 m² / 5,710 in²
*For the set of 2 tracks
Mesure S TECH 1000 G LETTRE
Documentos
S-TECH 1000G (Français) 30/1/2024 944,5 KB
S-TECH 1000G (English) 30/1/2024 779,1 KB
S-TECH 1000G (Português) 30/1/2024 775,8 KB
What is the difference between the ground contact area of the S-TECH 1000G and that of tires?

When you replace dual wheels with the S-TECH 1000G track system, the ground contact area is 2.5 to 3 times larger. *May vary depending on tire combination.

How do I install the S-TECH 1000G on my combine harvester?

You’ll be pleased to know that no changes are required to install the S-TECH 1000G on your combine harvester. You don’t need any special lifting tools or equipment other than a torque wrench. You will find detailed explanations for each of the steps to follow in the Soucy User Guide. 

How long does it take to install the S-TECH 1000G?

S-TECH 1000G installation time is approximately 2 to 3 hours. Installation by at least 2 people is recommended to facilitate the work. Allow a track tension and tracking adjustment time of approximately one hour.

Should I use an adapter to install the S-TECH 1000G on my combine harvester?

No adapter is required to install the S-TECH 1000G track system on John Deere combine harvesters. However, an adapter may be required to install this system on other brands.

Can I drive on the road with the S-TECH 1000G?

Track wear is affected by the load and the time spent on the road or hard surfaces. To maximize S-TECH 1000G performance and minimize track wear, avoid driving with a cutting head installed on the combine harvester, if possible. Also, if you’re driving with a heavy load, make sure to reduce the speed and make stops.

What is the life span of the S-TECH 1000G?

The life span depends on track system maintenance, compliance with best practices and the type of soil. You will find all the information you need to maximize the life span of your S-TECH 1000G in your Soucy User Guide.

Does the S-TECH 1000G come with a warranty?

All new S-TECH 1000Gs sold by an authorized dealer are covered by a warranty. Details on the warranty and registration procedures for your track system can be found in your Soucy User Guide.

How often should I service the S-TECH 1000G?

With the new axle design using oil bath hubs, you no longer need to grease the axles daily or weekly. Just change the oil once a year or after 500 hours of use.