Validate the compatibility of our product with your equipment.
Maximize your load capacity to save time.
VERSATILITY
The bolt-on design allows easy installation on a wide range of trailers and implements, from an air seeder in the spring to a grain cart in the fall.
NARROW PROFILE
The S-TECH 990 track system is narrower than the dual wheels typically used on a trailer. At just 36 in (914.4 mm) wide, versus dual-wheel systems which can be as wide as 55 in (1,397 mm), the S-TECH 990 lets you get considerably closer to trucks for easier unloading. Road transport is also safer thanks to a narrow width.
DYNAMIC TENSIONER
The spring tension system clears debris out continuously. The spring contained in the wheel counteracts compression to expel debris as the track system rotates, and without slowing it down.
| A | Track width | 914 mm |
| B | Overall length | 2,969 mm |
| C | Overall height | 1,331 mm |
| D | Pivot axis height | 856 mm |
| E | Rear tension wheel diameter | 711 mm |
| F | Support wheel diameter | 368 mm |
| Weight | Approximately 9,960 lbs / 4,520 kg | |
| Transport load capacity | Up to 50,000 lbs / 22,700 kg | |
| Maximum transport speed | 26.5 km/h / 16.5 mph | |
| Load capacity in the field | Up to 90,000 lbs / 41,000 kg | |
| Total ground contact area | 3.93m² / 6,084 in² | |
| *For the set of 2 tracks | ||
| S-TECH 990 (Français) | 2/1/2024 | 433.2 KB |
| S-TECH 990 (English) | 2/1/2024 | 431.7 KB |
| S-TECH 990 (Português) | 2/1/2024 | 433.1 KB |
The installation is very simple. The track system fits directly onto the wheel hubs without modifying the trailer. You will find detailed explanations for each of the steps to follow in the Soucy User Guide.
S-TECH 990 installation time is approximately 2 to 3 hours. Installation by at least 2 people is recommended to facilitate the work.
S-TECH 990 can be installed on most models of grain carts, air seeders, spreaders, and other trailers with hubs with a pilot of 280 mm (11.05 in) and a bolt circle of 335 mm (13.19 in) ; or hubs with a pilot of 454 mm (17.82 in) and a bolt circle of 512 mm (20.13 in).
There are two available configurations that use an adapter plate on the track system to match the hub dimensions. It is easy to make an adapter plate if needed for different dimensions.
All new S-TECH 990s sold by an authorized dealer are covered by a warranty. Details on the warranty and registration procedures for your track system can be found in your Soucy User Guide.
The life span depends on track system maintenance, compliance with best practices and the type of soil. You will find all the information you need to maximize the lifespan of your S-TECH 990 in your Soucy User Guide.
